1951 Allard K2 vs. 1952 Austin A 30
To start off, 1952 Austin A 30 is newer by 1 year(s). Which means there will be less support and parts availability for 1951 Allard K2. In addition, the cost of maintenance, including insurance, on 1951 Allard K2 would be higher. At 3,622 cc (8 cylinders), 1951 Allard K2 is equipped with a bigger engine. In terms of performance, 1951 Allard K2 (85 HP @ 3600 RPM) has 56 more horse power than 1952 Austin A 30. (29 HP @ 4800 RPM). In normal driving conditions, 1951 Allard K2 should accelerate faster than 1952 Austin A 30. With that said, vehicle weight also plays an important factor in acceleration. 1951 Allard K2 weights approximately 515 kg more than 1952 Austin A 30. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
1951 Allard K2 | 1952 Austin A 30 | |
Make | Allard | Austin |
Model | K2 | A 30 |
Year Released | 1951 | 1952 |
Engine Position | Front | Front |
Engine Size | 3622 cc | 803 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 85 HP | 29 HP |
Engine RPM | 3600 RPM | 4800 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 3 seats | 5 seats |
Vehicle Weight | 1195 kg | 680 kg |
Vehicle Length | 4270 mm | 3470 mm |
Vehicle Width | 1810 mm | 1410 mm |
Vehicle Height | 1580 mm | 1490 mm |
Wheelbase Size | 2700 mm | 2030 mm |