1952 Allard K3 vs. 2012 SsangYong Stavic

To start off, 2012 SsangYong Stavic is newer by 60 year(s). Which means there will be less support and parts availability for 1952 Allard K3. In addition, the cost of maintenance, including insurance, on 1952 Allard K3 would be higher. At 3,622 cc (8 cylinders), 1952 Allard K3 is equipped with a bigger engine. In terms of performance, 2012 SsangYong Stavic (163 HP @ 4000 RPM) has 68 more horse power than 1952 Allard K3. (95 HP @ 3800 RPM) In normal driving conditions, 2012 SsangYong Stavic should accelerate faster than 1952 Allard K3. With that said, vehicle weight also plays an important factor in acceleration. 2012 SsangYong Stavic weights approximately 743 kg more than 1952 Allard K3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 SsangYong Stavic (342 Nm @ 2400 RPM) has 124 more torque (in Nm) than 1952 Allard K3. (218 Nm @ 1800 RPM). This means 2012 SsangYong Stavic will have an easier job in driving up hills or pulling heavy equipment than 1952 Allard K3. 2012 SsangYong Stavic has automatic transmission and 1952 Allard K3 has manual transmission. 1952 Allard K3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 SsangYong Stavic will be easier to drive especially in heavy traffic.

Compare all specifications:

1952 Allard K3 2012 SsangYong Stavic
Make Allard SsangYong
Model K3 Stavic
Year Released 1952 2012
Engine Position Front Front
Engine Size 3622 cc 2696 cc
Engine Cylinders 8 cylinders 5 cylinders
Engine Type V in-line
Horse Power 95 HP 163 HP
Engine RPM 3800 RPM 4000 RPM
Torque 218 Nm 342 Nm
Torque RPM 1800 RPM 2400 RPM
Engine Bore Size 77.8 mm 86.2 mm
Engine Stroke Size 95.3 mm 92.4 mm
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Seats 3 seats 7 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 1180 kg 1923 kg
Vehicle Length 4500 mm 5130 mm
Vehicle Width 1680 mm 1830 mm
Vehicle Height 1380 mm 1920 mm
Wheelbase Size 2550 mm 3010 mm
Fuel Tank Capacity 59 L 80 L