1952 Austin A 90 vs. 1998 Rover 420
To start off, 1998 Rover 420 is newer by 46 year(s). Which means there will be less support and parts availability for 1952 Austin A 90. In addition, the cost of maintenance, including insurance, on 1952 Austin A 90 would be higher. At 2,660 cc (4 cylinders), 1952 Austin A 90 is equipped with a bigger engine. In terms of performance, both vehicles can yield 87 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1952 Austin A 90 weights approximately 201 kg more than 1998 Rover 420.
Because 1952 Austin A 90 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1952 Austin A 90. However, in wet, icy, snow, or gravel driving conditions, 1998 Rover 420, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1952 Austin A 90 (190 Nm) has 6 more torque (in Nm) than 1998 Rover 420. (184 Nm). This means 1952 Austin A 90 will have an easier job in driving up hills or pulling heavy equipment than 1998 Rover 420.
Compare all specifications:
1952 Austin A 90 | 1998 Rover 420 | |
Make | Austin | Rover |
Model | A 90 | 420 |
Year Released | 1952 | 1998 |
Engine Position | Front | Front |
Engine Size | 2660 cc | 1992 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 87 HP | 87 HP |
Engine RPM | 4000 RPM | 4300 RPM |
Torque | 190 Nm | 184 Nm |
Drive Type | Rear | Front |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 5 seats |
Vehicle Weight | 1390 kg | 1189 kg |
Wheelbase Size | 2440 mm | 2750 mm |