1956 Aston Martin DB3 vs. 2013 Chrysler 200
To start off, 2013 Chrysler 200 is newer by 57 year(s). Which means there will be less support and parts availability for 1956 Aston Martin DB3. In addition, the cost of maintenance, including insurance, on 1956 Aston Martin DB3 would be higher. At 3,600 cc (6 cylinders), 2013 Chrysler 200 is equipped with a bigger engine. In terms of performance, 2013 Chrysler 200 (279 HP @ 6400 RPM) has 69 more horse power than 1956 Aston Martin DB3. (210 HP @ 6000 RPM) In normal driving conditions, 2013 Chrysler 200 should accelerate faster than 1956 Aston Martin DB3. With that said, vehicle weight also plays an important factor in acceleration. 2013 Chrysler 200 weights approximately 708 kg more than 1956 Aston Martin DB3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1956 Aston Martin DB3 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Aston Martin DB3. However, in wet, icy, snow, or gravel driving conditions, 2013 Chrysler 200, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Chrysler 200 (353 Nm @ 4400 RPM) has 158 more torque (in Nm) than 1956 Aston Martin DB3. (195 Nm @ 3000 RPM). This means 2013 Chrysler 200 will have an easier job in driving up hills or pulling heavy equipment than 1956 Aston Martin DB3. 2013 Chrysler 200 has automatic transmission and 1956 Aston Martin DB3 has manual transmission. 1956 Aston Martin DB3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Chrysler 200 will be easier to drive especially in heavy traffic.
Compare all specifications:
1956 Aston Martin DB3 | 2013 Chrysler 200 | |
Make | Aston Martin | Chrysler |
Model | DB3 | 200 |
Year Released | 1956 | 2013 |
Engine Position | Front | Front |
Engine Size | 2920 cc | 3600 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 210 HP | 279 HP |
Engine RPM | 6000 RPM | 6400 RPM |
Torque | 195 Nm | 353 Nm |
Torque RPM | 3000 RPM | 4400 RPM |
Engine Bore Size | 83 mm | 96 mm |
Engine Stroke Size | 90 mm | 83 mm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | 6-speed automatic |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 914 kg | 1622 kg |
Vehicle Length | 3920 mm | 4870 mm |
Vehicle Width | 1510 mm | 2121 mm |
Vehicle Height | 1050 mm | 1482 mm |
Wheelbase Size | 2220 mm | 2765 mm |
Fuel Tank Capacity | 70 L | 64 L |