1965 Austin A 90 vs. 2008 Buick LaCrosse

To start off, 2008 Buick LaCrosse is newer by 43 year(s). Which means there will be less support and parts availability for 1965 Austin A 90. In addition, the cost of maintenance, including insurance, on 1965 Austin A 90 would be higher. At 3,564 cc (6 cylinders), 2008 Buick LaCrosse is equipped with a bigger engine. In terms of performance, 2008 Buick LaCrosse (240 HP @ 6000 RPM) has 120 more horse power than 1965 Austin A 90. (120 HP @ 4750 RPM) In normal driving conditions, 2008 Buick LaCrosse should accelerate faster than 1965 Austin A 90. With that said, vehicle weight also plays an important factor in acceleration. 2008 Buick LaCrosse weights approximately 290 kg more than 1965 Austin A 90. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1965 Austin A 90 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1965 Austin A 90. However, in wet, icy, snow, or gravel driving conditions, 2008 Buick LaCrosse, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Buick LaCrosse (305 Nm @ 2000 RPM) has 84 more torque (in Nm) than 1965 Austin A 90. (221 Nm @ 2750 RPM). This means 2008 Buick LaCrosse will have an easier job in driving up hills or pulling heavy equipment than 1965 Austin A 90. 2008 Buick LaCrosse has automatic transmission and 1965 Austin A 90 has manual transmission. 1965 Austin A 90 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Buick LaCrosse will be easier to drive especially in heavy traffic.

Compare all specifications:

1965 Austin A 90 2008 Buick LaCrosse
Make Austin Buick
Model A 90 LaCrosse
Year Released 1965 2008
Engine Position Front Front
Engine Size 2910 cc 3564 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 120 HP 240 HP
Engine RPM 4750 RPM 6000 RPM
Torque 221 Nm 305 Nm
Torque RPM 2750 RPM 2000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1570 kg 1860 kg
Vehicle Length 4780 mm 5040 mm
Vehicle Width 1750 mm 1860 mm
Vehicle Height 1540 mm 1460 mm
Wheelbase Size 2750 mm 2810 mm
Fuel Tank Capacity 34 L 64 L