1975 BMW 1502 vs. 2006 Lancia Phedra

To start off, 2006 Lancia Phedra is newer by 31 year(s). Which means there will be less support and parts availability for 1975 BMW 1502. In addition, the cost of maintenance, including insurance, on 1975 BMW 1502 would be higher. At 2,944 cc (6 cylinders), 2006 Lancia Phedra is equipped with a bigger engine. In terms of performance, 2006 Lancia Phedra (201 HP @ 6000 RPM) has 128 more horse power than 1975 BMW 1502. (73 HP @ 5800 RPM) In normal driving conditions, 2006 Lancia Phedra should accelerate faster than 1975 BMW 1502. With that said, vehicle weight also plays an important factor in acceleration. 2006 Lancia Phedra weights approximately 804 kg more than 1975 BMW 1502. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1975 BMW 1502 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1975 BMW 1502. However, in wet, icy, snow, or gravel driving conditions, 2006 Lancia Phedra, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 Lancia Phedra (285 Nm @ 3750 RPM) has 167 more torque (in Nm) than 1975 BMW 1502. (118 Nm @ 3700 RPM). This means 2006 Lancia Phedra will have an easier job in driving up hills or pulling heavy equipment than 1975 BMW 1502. 2006 Lancia Phedra has automatic transmission and 1975 BMW 1502 has manual transmission. 1975 BMW 1502 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2006 Lancia Phedra will be easier to drive especially in heavy traffic.

Compare all specifications:

1975 BMW 1502 2006 Lancia Phedra
Make BMW Lancia
Model 1502 Phedra
Year Released 1975 2006
Engine Position Front Front
Engine Size 1573 cc 2944 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 73 HP 201 HP
Engine RPM 5800 RPM 6000 RPM
Torque 118 Nm 285 Nm
Torque RPM 3700 RPM 3750 RPM
Engine Bore Size 84 mm 87 mm
Engine Stroke Size 71 mm 82.6 mm
Engine Compression Ratio 8.0:1 10.9:1
Top Speed 155 km/hour 205 km/hour
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Doors 2 doors 5 doors
Vehicle Weight 980 kg 1784 kg
Vehicle Length 4240 mm 4760 mm
Vehicle Width 1600 mm 1870 mm
Vehicle Height 1420 mm 1760 mm
Wheelbase Size 2510 mm 2830 mm
Fuel Tank Capacity 50 L 80 L