1998 Mercury Tracer vs. 2010 Nissan Frontier
To start off, 2010 Nissan Frontier is newer by 12 year(s). Which means there will be less support and parts availability for 1998 Mercury Tracer. In addition, the cost of maintenance, including insurance, on 1998 Mercury Tracer would be higher. At 3,952 cc (6 cylinders), 2010 Nissan Frontier is equipped with a bigger engine. In terms of performance, 2010 Nissan Frontier (261 HP @ 5600 RPM) has 152 more horse power than 1998 Mercury Tracer. (109 HP @ 5000 RPM) In normal driving conditions, 2010 Nissan Frontier should accelerate faster than 1998 Mercury Tracer. With that said, vehicle weight also plays an important factor in acceleration. 2010 Nissan Frontier weights approximately 189 kg more than 1998 Mercury Tracer. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 Nissan Frontier is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 Nissan Frontier. However, in wet, icy, snow, or gravel driving conditions, 1998 Mercury Tracer, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Nissan Frontier (381 Nm @ 4000 RPM) has 208 more torque (in Nm) than 1998 Mercury Tracer. (173 Nm @ 3750 RPM). This means 2010 Nissan Frontier will have an easier job in driving up hills or pulling heavy equipment than 1998 Mercury Tracer. 2010 Nissan Frontier has automatic transmission and 1998 Mercury Tracer has manual transmission. 1998 Mercury Tracer will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Nissan Frontier will be easier to drive especially in heavy traffic.
Compare all specifications:
1998 Mercury Tracer | 2010 Nissan Frontier | |
Make | Mercury | Nissan |
Model | Tracer | Frontier |
Year Released | 1998 | 2010 |
Engine Position | Front | Front |
Engine Size | 1986 cc | 3952 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 109 HP | 261 HP |
Engine RPM | 5000 RPM | 5600 RPM |
Torque | 173 Nm | 381 Nm |
Torque RPM | 3750 RPM | 4000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1140 kg | 1329 kg |
Vehicle Length | 4350 mm | 5230 mm |
Vehicle Width | 1700 mm | 1860 mm |
Vehicle Height | 1350 mm | 1880 mm |
Wheelbase Size | 2510 mm | 3200 mm |